Product Information Device Database® Evaluation Software Compliance Testing Distributors | NXP (founded by Philips) P89LPC916The NXP (founded by Philips) P89LPC916 is an 8051-based microcontroller with 2 clock highspeed core, 2K Bytes ISP/IAP Flash, 256 Bytes RAM, Dual DPTR, SPI 2 Timers/Counters, UART, SPI, WDT, RTC, A/D Converter.
Data Sheets 
|
| Development Tools
Compiler, Assembler, Linker, Debugger |
Simulated Features The following on-chip peripherals are simulated by the Keil Software µVision Debugger. - A/D Converter: ADC1/DAC1 (4I/1O)
- Analog Comparator
- Brownout Detection
- Flash Program Memory
- I²C Interface
- Interrupts 13S/4L (Including External)
- Keypad Interrupt (5I)
- Oscillator Control
- Port 0 (Quasi-bidirectional, Push-Pull, Input Only, Open Drain, 5-bits)
- Port 1 (Quasi-bidirectional, Push-Pull, Input Only, Open Drain, 5-bits)
- Port 2 (Quasi-bidirectional, Push-Pull, Input Only, Open Drain, 4-bits)
- Power Saving Modes (Idle and Power Down)
- Power-On Detection
- Real-Time Clock / System Timer
- Reset Module
- Serial UART (Enhanced Interface)
- SPI (Serial Peripheral Interface)
- System Configuration Byte UCFG1
- Timer 0 (Standard Timer + Pin Toggle + PWM Mode)
- Timer 1 (Standard Timer + Pin Toggle + PWM Mode)
- Watchdog Timer
The following on-chip peripherals are not simulated. |
AGSI Drivers The following AGSI Drivers are available for the Keil Software µVision Simulator. |
AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. |
Consultants The following consultants have experience with this device. |
|
|
