|
Product Information Device Database® Evaluation Software Compliance Testing Distributors | Infineon XC164CS-8FThe Infineon XC164CS-8F is a Microcontroller Built Around the Synthezisable C166S V2 Core with 2K Bytes Dual-port RAM for Register Sets and System Stack, 2K Bytes Data RAM Controlled by DMU, Internal Instruction Memory Block (IMB) Controlled by PMU, Program Memory Interface (PMI), 64K Bytes Program Flash, 2K Bytes RAM, 8K Bytes Start-up ROM, Intelligent On-chip Peripheral Subsystems, Automotive-specific Peripherals (ADC and TwinCAN), Debug and Emulation Control Blocks.
Data Sheets 
|
| Development Tools
Compiler, Assembler, Linker, Debugger |
Simulated Features The following on-chip peripherals are simulated by the Keil Software µVision Debugger. - A/D Converter (14 channels)
- Asynchronous/Synchronous Serial Interface ASC0
- Asynchronous/Synchronous Serial Interface ASC1 (without Autobaud)
- Capture/Compare Unit CAPCOM1 with T0 and T1 (without pins)
- Capture/Compare Unit CAPCOM2 with T7 and T8 (12 I/O Pins only)
- Capture/Compare unit CAPCOM6 with T12, T13
- CPU Configuration
- High-Speed Synchronous Serial Interface SSC0
- High-Speed Synchronous Serial Interface SSC1
- Interrupts
- NMI
- PEC
- Port 0 (2 x 8-bit I/O)
- Port 1 (2 x 8-bit I/O)
- Port 20 (5-bit I/O)
- Port 3 (14-bit I/O with Open Drain)
- Port 4 (8-bit I/O with Open Drain)
- Port 5 (14-bit Input with Disable)
- Port 9 (6-bit I/O with Open Drain)
- Real Time Clock
- Reset Configuration
- System Control Unit
- Timer Block GPT1 (T2, T3, T4)
- Timer Block GPT2 (T5, T6)
- Traps
- TwinCAN Module
- Watchdog Timer
The following on-chip peripherals are not simulated. - External Bus Controller
- Flash Program Memory
- Power Management (Peripheral Disabling)
- Programmable Frequency Output Signal
- Register Security Mechanism
- Sleep and Power-Down Mode
|
AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. |
Consultants The following consultants have experience with this device. |
|
|
|
