Keil™, An ARM® Company

Device Database®

Product Information

Device Database®

Evaluation Software

Compliance Testing

Distributors

  • Overview

    Select your country for a list of the
    distributors available in your area.

NXP (founded by Philips) LPC2917

The NXP (founded by Philips) LPC2917 is an ARM968E-S based high-performance 32-bit RISC Microcontroller with Thumb extensions, 512KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP), 48KB RAM, CPU clock up to 80 MHz, On-chip very low power ring oscillator (0.4MHz), On-chip crystal oscillator, On-chip PLL 2 CAN 2.0B controllers, 2 dedicated LIN 2.0 master controllers, Two 10-bit 8-channel ADC (3.3V), Four six-channel PWMs, Two 32-bit dedicated Timer for PWM and ADC, TCM, 2 UARTs, 3 Q-SPIs, Four 32-bit Timers, 32-bit Watchdog, 108 GPIO pins, Vectored Interrupt Controller (VIC) with 16 priority levels, up to 24 level-sensitive external interrupt pins, External Static Memory Controller (SMC), Flexible Reset Generator Unit (RGU), Flexible Clock-Generation Unit (CGU), Power Management Unit (PMU).

[Distributors]

Evaluation Software
Data Sheets
Data Sheet
1,444,360 bytes
User Manual
6,561,039 bytes

Get Adobe Acrobat Reader

Application Notes
Header Files
Evaluation Boards
Emulators
JTAG Debuggers
FLASH Utilities
  • ULINK
    Keil, An ARM Company
Development Tools
Compiler, Assembler, Linker, Debugger
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available at this time.

The following on-chip peripherals are simulated by the Keil Software µVision Debugger.

The following on-chip peripherals are not simulated.

  • Flash Memory
  • I²C Interface
  • Memory Accelerator Module
  • Memory Mapping Control
Real-Time OS
AGDI Drivers

The following AGDI Drivers are available for the Keil Software µVision Debugger.