Philips LPC2100 Blinky Example

The Blinky project is a simple program for the LPC2114 using Keil MCB2100 Microcontroller Board.

It blinks the LEDs at speed according to the Potentiometer setting and prints the current setting to Serial Port 1.

The Blinky program is available in different targets:

• Simulator runs in the software simulator in uVision.
• MCB2100 RAM runs from the Internal RAM located on chip. This target may be used for target debugging.
• MCB2100 Flash runs from the Internal Flash located on chip. This target may be used for the final application.