Analog Devices ADuC7020, 7021, 7024, 7026 D/A Example Program

This example program shows how to configure and use the D/A Converter of the following microcontrollers:

• Analog Devices ADuC7020
• Analog Devices ADuC7021
• Analog Devices ADuC7024
• Analog Devices ADuC7026

This program generates a sine wave as an analog output of the DAC. The digital values that create the sine wave are submitted to the converter for every tick of the built-in timer.

To run this program...

1. Select the device from the pull-down target list.
2. Build the project (Project - Build Target).
3. Start the uVision Debugger.
4. Click Go or Run (F5).
5. View the Analog Output values in the D/A Converter Peripheral Dialog.

µVision3 users may enable the built-in Logic Analyzer to view and measure the resulting analog signal graphically.