Philips LPC2000 PWM Example

This ARM example runs on the Philips LPC2129 and shows:

• Pulse Width Modulation (PWM) in double edge mode
• Analog-to-Digial Convert (ADC) input on ADC0
• Logic Analyzer Display
• Interrupt Function

The example program may be debugged using on the uVision Simulator and your PC--no additional hardware or evaluation boards are required. The Simulator provides cycle-accurate simulation of all on-chip peripherals of the LPC2000 device series.

A signal function is included that generates an analog volatage ramp on the ADC0 input. You may review the output using the Logic Analyzer that is built into uVision3.