µVISION: CREATING INTEL HEX FILES

Information in this article applies to:

• µVision Version 2.07

QUESTION

How do I create an Intel HEX file using the µVision IDE?

ANSWER

In µVision...

1. Select Options for Target from the Project menu.
2. Select the Output tab.
3. Make sure the Create HEX File check box is checked.
4. Select the proper HEX file format to create (typically this will be HEX-80 for 8051 programs and HEX-386 for large C16x programs).

SEE ALSO

• µVision: HEX FILE START AND END ADDRESSES HAVE NO EFFECT
• GENERAL: SPLITTING HEX FILES
• C166: HEX FILE NOT CREATED
• GENERAL: MAKING HEX FILES FROM BINARY FILES
• GENERAL: MAKING BINARY FILES FROM HEX FILES

FORUM THREADS

The following Discussion Forum threads may provide information related to this topic.

• No hex file produced!!

Last Reviewed: Tuesday, June 29, 2004