 Technical Support | |
| Home Products Events Support | |
Technical Support
Support Resources
- Support Knowledgebase
- Product Manuals
- Application Notes
- File Download Area
- Product Updates
- Discussion Forum
- Books
Product Information
MON251: RUNNING RISM-251 FASTER THAN 19,200 BAUD
Information in this article applies to:
- C251 Version 2.14
QUESTION
Is there a way to run the Serial port faster than 19.2 Kbaud with the Intel RISM monitor on the Intel USB Eval board or is RISM the limiting factor?
ANSWER
The RISM monitor only runs at 19,200 baud. If you need speed faster than that, try the Keil MON251 monitor. It is located in the MON251 directory. Take a look at the MON251US.TXT file. You may want to build your own copy of the Keil monitor that runs at whatever speed you need from the USB board. Look at the install.bat file for more information.
Be sure to check the Keil USB web page at http://www.keil.com/usb/.
Last Reviewed: Wednesday, November 16, 2005
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
